Unit Price:$0
Ext Price:$0



Richtek low-noise linear regulator with enable and bypass pins.
Use the specified output and BP capacitors for stability and noise performance.
RT9193-15GB is Richtek’s fixed 1.5 V RT9193 regulator in the green SOT-23-5 B package. It supplies up to 300 mA subject to input headroom and thermal limits. The recommended input range is 2.5 V to 5.5 V. The five-pin design provides an active-high enable and a reference-noise bypass pin.
1.5 V fixed output in SOT-23-5.
300 mA rated output.
BP pin accepts a short-grounded bypass capacitor.
Active-high enable with low standby current.
The original catalog package is SC-74A, SOT-753. Richtek’s B suffix identifies the five-lead SOT-23-5 package, represented by the registered SOT-753 family image. Confirm the exact land pattern and orientation with the Richtek drawing.

Richtek SOT-23-5 top-view pins are:
| Manufacturer | Richtek Technology |
|---|---|
| Exact order code | RT9193-15GB |
| Nominal output | 1.5 V fixed |
| Rated output current | 300 mA, subject to thermal and headroom limits |
| Recommended input | 2.5 V to 5.5 V |
| Output accuracy | ±2% at 1 mA under stated conditions |
| Quiescent current | 90 µA typical at no load |
| Output capacitor | At least 1 µF low-ESR ceramic for stability |
| BP capacitor | 22 nF or greater to GND; BP must not float |
| Enable | High above 1.2 V; shutdown below 0.4 V under specified conditions |
| Junction range | -40 °C to +125 °C |
| Manufacturer package | B: SOT-23-5 |
| Catalog package | SC-74A, SOT-753 |
The data-sheet dropout values for outputs above 2.8 V do not establish the 1.5 V option dropout. Check regulation at intended load.
Compare 1.5 V output, 300 mA capability, SOT-23-5 pin order, EN behavior, BP capacitor, output-capacitor ESR and thermal limits. No unverified internal alternative is linked.
Richtek RT9193 data sheet DS9193-18 defines the 15 output code, B SOT-23-5 package, G green plating, pinout and operating limits.
A compact 1.5 V local supply for portable control, wireless or sensing circuits when noise, load and thermal requirements fit Richtek’s specifications.
Verify the full RT9193-15GB code, SOT-23-5 outline, pin-one orientation and lot traceability against Richtek records. Generic package art is not proof of authenticity.
1.5 V fixed.
Up to 300 mA within thermal and input-headroom limits.
No. Richtek says BP must not float and recommends at least 22 nF to ground.
At least 1 µF low-ESR ceramic for stability.
Pin 3 EN, active high.
Place output and BP capacitors close to the IC, route their ground return cleanly, pull EN low if its controller can float and verify temperature rise at the maximum input-to-output voltage difference.
The following parts include "RT9193-15GB" in Silicon Labs RT9193-15GB.
The following parts are popular search parts in Test and Measurement.