Unit Price:$0
Ext Price:$0



LDLN025M33R is STMicroelectronics' fixed 3.3 V, 250 mA ultra-low-noise LDO in a five-lead SOT23 package.
The exact LDLN025M33R order code appears in ST's ordering table as a fixed 3.3 V SOT23-5L device with LN33 marking and tape-and-reel packing. It is intended for local low-noise rails with enable control and output discharge. Check input headroom and PCB thermal performance at the chosen load.
Original catalog package: SC-74A, SOT-753. ST specifies SOT23-5L for LDLN025M33R. The registered
shows the package class; consult ST's mechanical drawing for exact land pattern and pin-one orientation.
ST's SOT23-5L pin table identifies:
| Pin | Function |
|---|---|
| 1 | VIN supply |
| 2 | GND |
| 3 | EN; high turns on, low turns off, internal pull-down |
| 4 | NC; may be connected to ground |
| 5 | VOUT, regulated 3.3 V output |
| Parameter | Manufacturer value |
|---|---|
| Order code | LDLN025M33R |
| Output voltage | 3.3 V fixed |
| Output current | Up to 250 mA |
| Operating VIN | 1.5 V to 5.5 V, subject to dropout headroom |
| Dropout at 250 mA | 120 mV typical |
| No-load quiescent current | 12 µA typical |
| Package marking | LN33 |
ST's electrical characterization uses 1 µF input and output capacitors; follow the current data sheet's recommended capacitor and ESR range.
Check the exact 3.3 V voltage, 250 mA load, input range, dropout at the intended current, SOT23-5L pin order, enable behavior, output discharge, capacitor stability, noise and thermal limits. No internal alternative is linked without an exact product API match.
Primary technical source: STMicroelectronics LDLN025 data sheet. Ordering, pin and electrical tables identify the M33R option and its operating requirements.
Local low-noise 3.3 V rails for instrumentation, image sensing, RF modules and embedded devices, when the design meets the documented electrical and thermal limits.
Check the complete LDLN025M33R order code, five-lead SOT23 outline, LN33 marking and lot traceability. A generic package illustration cannot authenticate the device.
Is the output adjustable? No; M33R is fixed at 3.3 V.
May VIN be 1.5 V for a 3.3 V output? No; VIN must exceed the output by enough headroom for regulation.
What happens when EN is low? The regulator shuts down and its output-discharge feature helps discharge the rail.
Review the latest ST data sheet, capacitor guidance, load transients, headroom and junction temperature before production use. Typical figures are not guaranteed limits.
The following parts include "LDLN025M33R" in Silicon Labs LDLN025M33R.
The following parts are popular search parts in Test and Measurement.