Unit Price:$0
Ext Price:$0



LT3007ITS8-3.3#TRPBF is a fixed 3.3 V order option in Analog Devices' LT3007 low dropout linear regulator series. It supports up to 20 mA output current and is designed for micropower operation from high input voltages, subject to data sheet headroom and thermal limits.

The LT3007 family operates with input voltage up to 45 V and has a 3 microampere typical no-load quiescent current. This exact order code provides 3.3 V nominal fixed output in an 8-lead ThinSOT-23 package. The output requires an effective minimum 2.2 microfarad low-ESR ceramic capacitor for stability under the manufacturer's conditions.
The combination of high input-voltage capability, low operating current, shutdown control, low dropout and a small ceramic output capacitor supports compact supply designs. The series includes reverse-battery and reverse-output protection as well as current and thermal limiting.
Typical dropout is 300 mV at 20 mA under the data sheet test conditions. The family is designed for fault tolerance against an adjacent-pin short or an open pin, as described in the manufacturer FMEA section. Shutdown current is below 1 microampere under the stated conditions. Fixed-output parts have a SENSE pin for output sensing; connect SENSE to OUT near the load. Connect SHDN to IN when shutdown control is unused.
Original registered package: SOT-23-8 Thin, TSOT-23-8. ADI identifies the package as 8-lead ThinSOT-23. The JPG is a representative package illustration, not a dimensioned mechanical drawing. Use the current manufacturer outline and recommended land pattern for the board footprint.
| Pin | Name | Function |
|---|---|---|
| 1 | SHDN | Active-low shutdown control; tie to IN if unused. |
| 2, 3, 4 | GND | Ground connections and heat path. |
| 5 | IN | Input supply. |
| 6 | NC | No internal connection; leave floating as directed in the fault-analysis guidance. |
| 7 | OUT | Regulated output. |
| 8 | SENSE | Output-sense input for the fixed-output option; connect to OUT near the load. |
| Manufacturer | Analog Devices |
|---|---|
| Exact model | LT3007ITS8-3.3#TRPBF |
| Fixed output | 3.3 V nominal |
| Output current | 20 mA maximum under data sheet conditions |
| Input range | 2.0 to 45 V family operating range, with required output headroom |
| Typical application input | 3.8 to 45 V for a 3.3 V, 20 mA example circuit in the data sheet |
| Typical dropout at 20 mA | 300 mV |
| Output capacitor | 2.2 microfarads effective low-ESR ceramic minimum |
| Junction temperature range | -40 to +125 degrees C for E/I grades |
| Manufacturer package | 8-lead ThinSOT-23 |
Confirm the 3.3 V rail, the available input voltage across the full load and temperature range, the worst-case dropout specification, 20 mA load ceiling and power dissipation. Use the manufacturer's capacitor placement and effective-capacitance guidance, accounting for ceramic DC-bias and temperature derating. The 3.8 V figure above describes an application example and must not replace complete headroom analysis.
Primary technical source: Analog Devices LT3007 Series data sheet. The ADI LT3007 product catalog provides manufacturer product and order information. Verify the exact order option, package drawing, electrical limits and pin diagram against the current manufacturer documents before board release.
Potential applications include battery-powered monitors, industrial control and low-current standby or keep-alive rails when the source voltage, output current and thermal conditions meet the manufacturer limits.
Verify the complete LT3007ITS8-3.3#TRPBF order code, 8-lead ThinSOT-23 package, pin-one orientation and traceability against Analog Devices documentation. Inspect the body and terminals before assembly.
No. This exact suffix is the fixed 3.3 V version.
Use at least 2.2 microfarads of effective low-ESR ceramic output capacitance under the data sheet conditions.
Connect the fixed-output SENSE pin to OUT, preferably near the load, according to the manufacturer pin guidance.
Check input-to-output headroom, capacitor derating, SHDN and SENSE connections and thermal dissipation against the full data sheet. Typical dropout does not replace guaranteed worst-case design limits. The TSOT-23-8 JPG is illustrative. No live price or inventory claim is made.
The following parts include "LT3007ITS8-3.3#TRPBF" in Silicon Labs LT3007ITS8-3.3#TRPBF.
The following parts are popular search parts in Test and Measurement.