Unit Price:$0
Ext Price:$0



onsemi NCP1117LPST33T3G is the fixed 3.3 V SOT-223 version of the NCP1117LP low-dropout positive regulator family, rated for output current in excess of 1 A and operation with input voltage up to 18 V.
Electrical limits, pin functions, package details, and packing were checked against the official onsemi NCP1117LP/D datasheet.
NCP1117LPST33T3G provides a fixed 3.3 V rail for consumer and industrial power systems. Compared with traditional 1117 regulators, the LP family reduces quiescent current while retaining the familiar three-terminal topology, current limiting, safe-operating-area compensation, and thermal shutdown.
Designed to provide output current in excess of 1 A when thermal conditions permit.
Fixed-output ground current is 550 microamps typical and 700 microamps maximum under the stated test condition.
The 33 ordering code identifies the factory-set 3.3 V option.
Includes output current limiting and thermal shutdown protection.
The family supports operation up to 18 V input, subject to power-dissipation limits.
Dropout is 1.3 V typical and 1.4 V maximum at 1 A and 25 degrees C.
Use at least 4.7 microfarads on the output with ESR from 20 milliohms to 20 ohms over temperature.
The G suffix identifies the Pb-free device; T3 denotes tape-and-reel packing.
The ST suffix identifies the onsemi SOT-223 package, case 318H. The source catalog also registers this body as TO-261-4 / TO-261AA. The heatsink tab is connected to pin 2 (VOUT), and the orderable ships 4000 pieces per tape-and-reel.

Pin 1 is ADJ only on adjustable family members.
| Manufacturer | onsemi |
|---|---|
| Family | NCP1117LP low-power LDO regulator |
| Exact output | Fixed 3.3 V |
| Output current | In excess of 1 A, subject to thermal limits |
| DC input rating | -0.3 V to 18 V absolute maximum |
| 3.3 V output at 25 degrees C | 3.235 V minimum, 3.3 V typical, 3.365 V maximum under the stated test condition |
| Dropout at 1 A | 1.3 V typical, 1.4 V maximum at 25 degrees C |
| Load regulation | 26 mV typical, 33 mV maximum for the stated 3.3 V test conditions |
| Fixed-device quiescent current | 550 microamps typical, 700 microamps maximum |
| Current limit | 1.1 A minimum under the stated condition |
| Ripple rejection | 60 dB under the stated datasheet condition |
| Thermal shutdown | 165 degrees C typical with 10 degrees C typical hysteresis |
| Operating ambient/junction range | 0 degrees C to +125 degrees C |
| Output capacitor | 4.7 microfarads minimum; ESR 20 milliohms to 20 ohms |
| Package and packing | SOT-223, Pb-free, 4000 per tape-and-reel |
Typical values are not guaranteed limits. Use the complete current onsemi datasheet and its exact test conditions.
A replacement must match the fixed 3.3 V output, 1 A class load capability, dropout, input rating, stability capacitor and ESR window, pin 1 ground function, SOT-223 footprint, and VOUT-connected tab. Thermal performance must be revalidated on the actual PCB.
No internal replacement link is asserted without an exact API-confirmed catalog match and engineering review.
onsemi identifies NCP1117LPST33T3G as the 3.3 V fixed NCP1117LP in the ST SOT-223 package. The T3G ending denotes 4000-piece tape-and-reel and Pb-free construction.
Regulated rails in televisions, monitors, set-top boxes, and game consoles.
Linear post-regulation after switching power supplies where dissipation is acceptable.
Local supply regulation for hard-drive and embedded controllers.
General fixed 3.3 V rails requiring familiar 1117 pin compatibility.
Verify the complete NCP1117LPST33T3G order code, SOT-223 dimensions, 17L33 family marking, Pb-free indicator, pin-1 orientation, reel label, date/lot traceability, and tab connection during incoming inspection. Package appearance alone does not establish authenticity.
It is the fixed 3.3 V option and supports output current in excess of 1 A when thermal limits are satisfied.
The datasheet specifies 1.3 V typical and 1.4 V maximum dropout at 1 A and 25 degrees C.
Use at least 4.7 microfarads and keep ESR within 20 milliohms to 20 ohms across the operating range.
No. The SOT-223 heatsink tab is connected to pin 2, VOUT.
Pin 1 is ground on this fixed-output device; it is ADJ on adjustable family versions.
Calculate dissipation from input voltage, 3.3 V output, and load current; then validate junction temperature with the actual PCB copper, airflow, ambient, and transient conditions. Confirm capacitor effective value and ESR, load steps, input surge limits, and tab routing before production release.
The following parts include "NCP1117LPST33T3G" in Silicon Labs NCP1117LPST33T3G.
The following parts are popular search parts in Test and Measurement.