Unit Price:$0
Ext Price:$0



MAX8877EZK50+T is the fixed 5.0 V version of the Analog Devices MAX8877/MAX8878 low-dropout linear regulator family. It is supplied in the five-pin SOT-23 package for compact, low-noise local power rails.

The MAX8877/MAX8878 family accepts 2.5 to 6.5 V input and delivers up to 150 mA subject to dropout and thermal limits. The fixed 5.0 V option and EZK package are documented in the manufacturer ordering information. The +T order code denotes tape-and-reel supply. This MAX8877 option does not include the MAX8878 active-discharge feature.
Low noise, low dropout, shutdown control, short-circuit protection, thermal shutdown and reverse-battery protection help support small battery-powered and precision analog designs. The manufacturer reports typical dropout of 165 mV at 150 mA under specified test conditions; verify worst-case headroom from the data sheet.
The MAX8877 is a fixed-output regulator with an optional bypass capacitor connection at BP for additional noise reduction. A 0.01 microfarad BP capacitor is used in the manufacturer's low-noise example. This MAX8877 option does not include the MAX8878 active-discharge feature.
Original registered package: SOT-23-5 Thin, TSOT-23-5. The manufacturer identifies EZK as thin five-pin SOT-23. The JPG is a representative package illustration, not a dimensional drawing. Use the official package outline and land pattern for assembly dimensions and pin-one orientation.
| Pin | Name | Function |
|---|---|---|
| 1 | IN | Unregulated supply input. |
| 2 | GND | Ground reference. |
| 3 | SHDN | Shutdown control input; follow the manufacturer's logic levels. |
| 4 | BP | Reference bypass node for optional noise-reduction capacitor. |
| 5 | OUT | Regulated 5.0 V nominal output. |
| Manufacturer | Analog Devices / Maxim Integrated |
|---|---|
| Exact model | MAX8877EZK50+T |
| Fixed output | 5.0 V nominal |
| Output current | Up to 150 mA under data-sheet conditions |
| Input supply | 2.5 to 6.5 V, with dropout headroom |
| Output capacitor | At least 1 microfarad ceramic under the stated stability conditions |
| Operating temperature | -40 to +85 degrees C |
| Package | Thin five-pin SOT-23, EZK |
Check input range, 5.0 V rail tolerance, peak load, worst-case dropout and package power dissipation over temperature. Use at least 1 microfarad at IN and at least 1 microfarad effective ceramic at OUT as directed by the manufacturer; account for ceramic DC-bias derating. If output discharge during shutdown matters, compare the MAX8877 and MAX8878 behavior before selecting an order code.
Primary technical source: Analog Devices MAX8877/MAX8878 data sheet, Rev. 2. The ADI MAX8877 product catalog supports the current +T orderable nomenclature. Consult the ordering table, electrical characteristics, pin description, capacitor guidance and package drawing for final design approval.
Potential uses include portable instruments, battery-powered controls, low-noise analog rails and local point-of-load regulation where the supply, load and thermal conditions fit the manufacturer's limits.
Verify the full MAX8877EZK50+T order code, EZK thin five-pin body, pin-one location and supplier traceability against official documentation. Inspect package and leads before placement.
No. This is the fixed 5.0 V version.
Use at least 1 microfarad effective ceramic at OUT under the manufacturer's stated stability conditions and verify actual capacitance under bias.
This MAX8877 option does not include the MAX8878 active-discharge feature.
Observe the manufacturer's application circuit, capacitor placement, SHDN control limits and thermal derating. The typical dropout and noise figures are condition-specific and are not guaranteed maximums. The TSOT-23-5 image is illustrative; follow the official package drawing for layout. No live price or inventory claim is made.
The following parts include "MAX8877EZK50+T" in Silicon Labs MAX8877EZK50+T.
The following parts are popular search parts in Test and Measurement.