Unit Price:$0
Ext Price:$0



Texas Instruments LM79L12ACM/NOPB is a fixed negative-voltage regulator for a nominal −12 V rail. TI lists the exact order code as the eight-pin narrow SOIC D package. LCDChip records the package as 8-SOIC (0.154", 3.90 mm width).
The LM79LXXAC family regulates negative supply rails and specifies output-current capability above 100 mA. This exact AC variant is the −12 V option in the eight-pin SOIC package. The controlled datasheet specifies 100 mA electrical test points, output tolerance over line and load, and internal short-circuit, safe-operating-area and thermal protection. Confirm available headroom and package dissipation for the intended negative input.
Fixed regulated rail for circuits requiring a negative supply.
Electrical characteristics are specified at 100 mA output load.
Internal short-circuit, safe-operating-area and thermal protection.
Eight-pin D package for surface-mount assembly.
The original catalog designation is 8-SOIC (0.154", 3.90 mm width). The configured package registry calls this 8-SOIC and provides its JPG. TI identifies the exact orderable part as SOIC D with eight pins. Use the current TI D package outline for land-pattern dimensions and top-view orientation.

TI's LM79LXXACM eight-pin SOIC D top-view connection diagram assigns pin 1 to −VOUT, pins 2, 3, 6 and 7 to −VIN, pin 5 to GND, and pins 4 and 8 to NC. The NC pins are open internally.
| Nominal output | −12 V, fixed |
|---|---|
| Specified output load | 1 mA to 100 mA; electrical reference point at 100 mA |
| Output at 25°C, 100 mA | −12.5 V minimum, −12 V typical, −11.5 V maximum |
| Output over stated line and load | −12.6 V to −11.4 V at 1–100 mA and VIN −27 V to −14.8 V |
| Input range at 40 mA | −27 V to −14.5 V under specified output-voltage conditions |
| Absolute-maximum input | −35 V stress rating |
| Quiescent current | 2 mA typical, 6 mA maximum at IOUT = 100 mA |
| Output noise | 96 µV typical, 10 Hz to 10 kHz at 100 mA and 25°C |
| Ripple rejection | 52 dB typical at 120 Hz, 100 mA and 25°C |
| Minimum output capacitor | 0.1 µF for compensation |
| Operating temperature | 0°C to +70°C |
| Package | Eight-pin SOIC D, catalog 8-SOIC narrow |
| Protection | Short-circuit, safe-operating-area and thermal shutdown |
Input voltage is negative with respect to ground. The −35 V absolute limit is a stress rating; use the specified electrical input ranges for regulated operation.
Compare negative output polarity, nominal −12 V output, guaranteed line and load ranges, SOIC D pin assignments, capacitor stability, operating temperature and thermal limits. The LM79L15 family has a different output voltage and is not an electrical substitute for a −12 V rail. No internal alternative is linked without an exact catalog match and circuit review.
Texas Instruments LM79LXXAC Series datasheet SNOSBR8K identifies the LM79L12ACM/NOPB orderable code in its package addendum and documents the −12 V electrical characteristics, SOIC D connection diagram, 0.1 µF output-capacitor requirement and internal protection functions.
Negative 12 V supply alongside a separately regulated positive rail.
Local negative supply for compatible analog stages.
Fixed negative rail for small-load measurement circuits.
Regulated negative bias where input and thermal margins are suitable.
Verify the complete LM79L12ACM/NOPB order code, TI traceability and eight-pin SOIC body. TI lists the package marking as LM79L 12ACM. Confirm negative output polarity and the specified test conditions during incoming inspection.
No. It regulates a nominal −12 V output relative to ground.
Pins 4 and 8 are NC and open internally.
The family datasheet calls for at least 0.1 µF for compensation.
−35 V is an absolute-maximum stress rating; use the specified input operating ranges.
No. Check SOIC thermal resistance and the input-to-output voltage drop at the intended load.
Use the current TI controlled datasheet and SOIC D drawing. Confirm negative-voltage polarity, all input pins, NC handling, output-capacitor placement and junction temperature before board release.
The following parts include "LM79L12ACM/NOPB" in Silicon Labs LM79L12ACM/NOPB.
The following parts are popular search parts in Test and Measurement.