NXP USA Inc. MC14600P

The MC14600 translates an external alarm-level voltage into audible and visual indicators. Its high-impedance detection path compares the sensor signal with an externally established threshold. A separate low-voltage comparator monitors battery condition, while the oscillator times LED pulses and drives a piezoelectric horn during alarm or low-battery signaling.

The catalog records 16-DIP (0.300 inch, 7.62 mm). The manufacturer's ordering table identifies MC14600P as case 648-08, 16-lead plastic DIP, agreeing with the catalog. Use the controlled PDIP case drawing to check pin pitch, body width, seating height, and pin-1 orientation. The datasheet does not identify the P suffix as a Pb-free packaging designation; verify material compliance separately.

Assembly checks

• Verify the 16-lead, 300 mil PDIP body.
• Confirm pin-1 notch and socket orientation.
• Follow datasheet oscillator-component leakage guidance.
• Keep horn-drive and high-impedance sense routing separated.

The registered 16-DIP JPG is absent locally and returns HTTP 404 on the production site; this draft is not publishable until that image is restored and verified.

Pin functions below follow the manufacturer's 16-PDIP top-view diagram. Consult the current drawing for complete wiring and unused-pin treatment.

Maximum ratings are not operating targets. Typical values depend on the datasheet's stated bias components, supply, temperature, and load; check the full tables and application circuit.

Other MC14600 variants appear in 16-pin SOIC or alternate material configurations. A different package or suffix is not automatically footprint- or qualification-equivalent. Compare pinout, horn-drive behavior, supply limits, battery threshold, temperature range, component network, material status, and system certification before replacing MC14600P. No unverified internal product link is made.

The MC14600 Rev. 7 technical datasheet bears Freescale Semiconductor identification and is hosted in NXP's document archive. It identifies the P-suffix part as case 648-08, 16 PDIP. Consult the current manufacturer record, lifecycle notices, and authorized documentation before procurement or design release.

Inspect the full order code, 16-PDIP case, pin-1 mark, device marking, lot traceability, and material documentation. Verify bias components, battery-loading behavior, horn output, and sensor thresholds during production testing. The listing alone does not establish authorized-channel provenance, certification, or fitness for any safety-critical application.

Do not rely on this IC alone for life-safety decisions. Evaluate sensor failures, battery depletion, horn audibility, environmental range, false alarms, supervisory testing, and regulatory requirements in the complete product. Use the controlled manufacturer datasheet as the design authority. Publication is blocked until the correct production package JPG is accessible and verified.