Hello! now
tms@lcdchip.com
Analog Devices Inc. ADAL6110-16BCPZ
- Part No.:
- ADAL6110-16BCPZ
- Manufacturer:
- Analog Devices Inc.
- Category:
- Specialized ICs
- Package:
- 48-WFQFN Exposed Pad, CSP
- Description:
- IC LIDAR SIGNAL PROCESSR 48LFCSP
- Quantity:
Unit Price:$0
Ext Price:$0
- Payment:
- Shipping:
Product Details
ADAL6110-16BCPZ - 16-Channel LIDAR Signal Processor
ADAL6110-16BCPZ is the exact discontinued Analog Devices order code for a 16-channel LIDAR signal processor in a 7 mm by 7 mm, 48-lead LFCSP. It integrates optical-return acquisition, gain control, timing and SPI-based readout.
Confirm package marking, lot and board footprint before use in an installed system.
Overview
The ADAL6110-16 captures up to 16 optical-return channels at the same time. Each channel includes a 16-bit analog-to-digital converter, and captured waveforms are stored in on-chip SRAM for readout over a four-wire SPI port. Integrated transimpedance amplification, gain and sampling functions simplify a multichannel LIDAR receiver front end.
Key Advantages
Simultaneous capture
Up to 16 return channels can be sampled in a single acquisition sequence.
Integrated signal chain
Transimpedance, gain, sampling and conversion functions reduce external front-end circuitry.
Interference management
DC balance and ambient-light cancellation help reject offset and modulated interference.
Programmable control
Automatic gain control and timing options adapt capture behavior to the system.
Feature Summary
Channel conversion
Each of the 16 channels incorporates a 16-bit ADC.
Waveform storage
On-chip SRAM buffers captured data before SPI readout.
Frame rate
The data sheet states up to 1.9 kHz at a 50 MHz SPI clock under specified conditions.
Trigger support
An integrated transmitter-fire output and timing core coordinate acquisition.
Package & Footprint
Analog Devices specifies a 7 mm by 7 mm, 48-lead LFCSP. The catalog describes the case as 48-WFQFN Exposed Pad, CSP. The local package register has a broad 48-WFQFN Exposed Pad entry but no exact CSP-suffixed entry, so this case and its artwork are marked as a new package requiring review. No matching local JPG exists.
- Compare the Analog Devices package drawing with the proposed board land pattern.
- Confirm exposed-pad dimensions, soldering and thermal connection.
- Check pin-one orientation and supplied-lot package marking.
Do not publish until exact registry mapping and local JPG are verified.
Pin Functions
The Analog Devices data sheet contains the numbered 48-lead pin configuration. Use it for wiring; the groups below are functional context only.
Optical inputs
CH0 through CH15 connect to photodiode return channels and their integrated TIA paths.
SPI and control
SCLK, MOSI, MISO and chip-select support readout and register configuration.
Timing
Trigger, reset and crystal-related pins coordinate capture and transmitter firing.
Supplies
Analog, digital, I/O and clock supply and ground domains require the documented decoupling and layout.
Verify every lead number and exposed-pad connection in the original pinout before a board change.
Key Specifications
| Exact order code | ADAL6110-16BCPZ |
|---|---|
| Manufacturer | Analog Devices |
| Function | Multichannel LIDAR signal processor |
| Input channels | 16 simultaneous capture channels |
| ADC resolution | 16 bits per channel |
| Readout interface | Four-wire SPI |
| Maximum stated frame rate | Up to 1.9 kHz at 50 MHz SPI clock |
| Gain management | Integrated automatic gain control |
| Waveform buffer | On-chip SRAM |
| Supply classes | 1.8 V and 3.3 V typical domains |
| Package | 48-lead LFCSP, 7 mm x 7 mm, exposed pad |
| Lifecycle | Discontinued; ADI PDN 22_0115 names this exact code |
Use the original data sheet and supplied-lot documentation for operating limits and qualification.
Replacement Considerations
ADI's discontinuance notice lists no direct replacement for this order code. The -R7 and -RL suffixes denote other packaging options, not verified board-level substitutes. Compare channel count, capture timing, interface behavior, supply domains, package geometry, firmware and optical system requirements before redesign. No unverified internal alternative model link is included.
Manufacturer Information
The Analog Devices product page and Rev. Sp0 data sheet supply device architecture, package and performance information. ADI PDN 22_0115 names the exact ADAL6110-16BCPZ code as discontinued, with final last-time-buy and last-time-ship dates in 2024. Current distributor inventory is legacy stock and requires source and lot verification.
Applications
Collision avoidance
Multichannel return acquisition in autonomous and assisted systems.
Industrial ranging
Distance measurement and safety-curtain sensing.
Mapping
Corridor and environment scanning with simultaneous channels.
Legacy maintenance
Qualified replacement inventory for existing designs using this exact order code.
Quality & Authenticity
Inspect full marking, 48-lead LFCSP dimensions, exposed-pad condition, date and lot code, moisture handling and supply-chain traceability. Obsolete inventory should be assessed for storage and rework history. This listing does not claim electrical retest or an authorized current-production lot.
FAQ
How many return channels are supported?
Up to 16 can be captured simultaneously.
How is waveform data retrieved?
Captured data is buffered in on-chip SRAM and read over four-wire SPI.
Is there a direct ADI replacement?
The ADI discontinuance notice lists none for this exact code.
Is the package image verified?
No. An exact CSP-suffixed package entry and its JPG require review.
Engineering Notice
Keep this detail under review until the exact package registry entry, 48-lead LFCSP JPG, lot marking and a qualified current distributor stock/price are confirmed. Do not publish while any gate remains open.
ADAL6110-16BCPZ Information
- Specifications
- Tags
- Product attributes
- Attribute value
- Manufacturer:
- Analog Devices Inc.
- Series:
- -
- Package/Case:
- 48-WFQFN Exposed Pad, CSP
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Type:
- LIDAR Signal Processor
- Applications:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 48-LFCSP (7x7)
- Grade:
- -
- Qualification:
- -
- Include Parts
- Popular Search
The following parts include "ADAL6110-16BCPZ" in Silicon Labs ADAL6110-16BCPZ.
- Part Number
- Manufacturer
- Package
- Description
- CAP200DG-TL Power Integrations 8-SOIC (0.154", 3.90mm Width) IC AUTOMATIC DISCHARGE 8SO
- ATSHA204A-MAHDA-T Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
- ATSHA204A-SSHDA-T Microchip Technology 8-SOIC (0.154", 3.90mm Width) IC AUTHENTICATION CHIP 8SOIC
- ATSHA204A-STUCZ-T Microchip Technology TO-236-3, SC-59, SOT-23-3 IC AUTHENTICATION CHIP SOT23-3
- ATECC608B-MAHDA-T Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
- ATECC608B-MAHCZ-S Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
- ATECC608B-SSHDA-T Microchip Technology 8-SOIC (0.154", 3.90mm Width) IC AUTHENTICATION CHIP 8SOIC
- ATECC608B-MAHDA-S Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
- ATECC608A-MAHDA-S Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
- ATECC608B-MAVDA-T Microchip Technology 8-UFDFN Exposed Pad IC AUTHENTICATION CHIP 8UDFN
The following parts are popular search parts in Test and Measurement.
Inventory:4,320
Please send an inquiry. Send us your inquiry, and we will respond immediately.
