Analog Devices Inc./Maxim Integrated MAX4507CAP+

The MAX4507 combines eight independent two-terminal protection channels. In normal operation, each channel passes a rail-to-rail analog signal. An excessive input voltage opens the faulted input path and clamps its output toward the appropriate supply rail, helping protect the downstream circuit. The channels do not require individual logic-control inputs.

The catalog identifies MAX4507CAP+ as a 20-SSOP device. The package registry uses the normalized name 20-SSOP and expects the JPG below. Confirm the manufacturer's current 20-SSOP land pattern and package drawing before PCB release.

Layout checks

• Confirm 20 leads and 5.30 mm nominal body width.
• Validate pitch, lead span, pin 1 and solder land geometry against the controlled drawing.
• Do not assume interchangeability with the 18-pin SOIC variants.

The registered package JPG is not currently present and must be added and visually checked before publication.

The manufacturer's MAX4507 pin-function diagram identifies eight input/output channel pairs plus the positive and negative supply rails.

Use the 20-SSOP pin-number drawing in the manufacturer data sheet when assigning schematic symbols and PCB pads.

Limits, typical values and operating conditions are not interchangeable; confirm the complete electrical table for the final use case.

The related MAX4507CAP+T and MAX4507EAP+ order codes exist in the product catalog, but their publication status has not been confirmed. The +T suffix concerns ordering media; the EAP variant has an extended temperature grade. Neither should be treated as a drop-in replacement without checking the exact ordering specification, 20-SSOP drawing, electrical limits, qualifications and availability. MAX4507CWN+ uses an 18-pin SOIC package and is not footprint-compatible.

Analog Devices maintains the MAX4507 family information and the Maxim MAX4506/MAX4507 data sheet. The current online model list shows MAX4507CAP+T but does not separately show MAX4507CAP+. Confirm the exact non-T suffix and lifecycle with the manufacturer or authorized channel before purchasing.

Verify the full ordering code, lot marking, package dimensions and supply-chain traceability against the manufacturer's records. Review the applicable moisture and soldering documents before assembly. A marketplace listing is not evidence of authorized inventory.

Use the latest manufacturer-controlled data sheet and package drawing for final electrical and mechanical approval. This draft does not establish a current stock quote, exact CAP+ lifecycle or substitution approval. Resolve those items and the missing package image before publication.