Renesas Electronics Corporation M62370GP#R60J

The M62370GP is a multi-channel CMOS D/A converter with buffer amplifiers and serial control. Its 36 analog outputs allow a controller to set numerous trim or control voltages without individual digital potentiometers. The exact M62370GP#R60J ordering code is listed by DigiKey as a 48-LQFP surface-mount part.

DigiKey identifies M62370GP#R60J as a 48-lead LQFP, 7 mm by 7 mm body. LCDChip registers the package as 48-LQFP. Check the controlled Renesas mechanical drawing and pin-1 orientation before land-pattern release.

Assembly checks

• Match lead pitch and body dimensions to the controlled drawing.
• Verify orientation and reference-pin placement.
• Confirm reel or bulk handling with the selected supplier.

The registered local 48-LQFP JPG is currently missing; the reserved image URL is not a valid illustration.

The M62370GP data sheet identifies DI, CLK and LD as serial-control signals and DO as serial data output for cascaded control. VCC/GND feed the digital domain; VDD/VSS terminals define analog converter references; AO1 through AO36 are analog outputs. Use the manufacturer's complete 48-pin table for every net assignment rather than inferring physical pin numbers from this functional summary.

Do not use the conflicting supply statements as a qualified operating limit until Renesas resolves them for this ordering code.

Compare channel count, serial command format, selector behavior, analog references, buffered output drive, voltage range and exact footprint before considering another DAC. No substitute is presented as a drop-in replacement, and no unverified catalog model is linked.

Renesas's General-Purpose ICs catalog identifies M62370 as a 36-channel, 8-bit, three-line serial DAC with output buffers in a 48-pin LQFP. The detailed M62370GP data sheet, revision 3.00 dated March 2008, describes the selector, serial interface and reference architecture. The two manufacturer-branded documents do not state the supply range consistently.

Verify the complete M62370GP#R60J code, 48-LQFP marking, pin-1 indication, supplier traceability and lot documentation on receipt. Ask the supplier for applicable quality and handling records before using marketplace inventory in a controlled build.

This page is a review draft, not a substitute for a current controlled Renesas data sheet. Resolve the supply-range conflict, verify the exact ordering-code package and pin table, and provide the registered 48-LQFP JPG before publication or design qualification.