Unit Price:$0
Ext Price:$0



Microchip Technology HCS362T-I/SN is an industrial-temperature, four-button code-hopping encoder in an 8-lead plastic SOIC, supplied on tape and reel.
Device, pinout, and ordering characteristics follow Microchip HCS362 datasheet DS40189E.
The HCS362 produces a 69-bit transmission with a 32-bit encrypted hopping portion and a 37-bit fixed portion. Four switch inputs support up to 15 functions for remote-control systems. The HCS362T device designation specifies tape-and-reel ordering; I identifies −40 to +85 °C, and SN specifies the 8-lead plastic SOIC. A compatible receiver must learn the encoder key and maintain synchronization.
The encrypted hopping field changes across transmissions to resist simple captured-code replay.
Four inputs allow up to 15 encoded functions.
Programmable keys and configuration are stored in on-chip EEPROM with read protection.
Tape-and-reel presentation accompanies the industrial −40 to +85 °C order grade.
69 bits comprise 32 encrypted hopping bits and 37 fixed bits.
Two programmable 64-bit encryption keys and a 60-bit seed support the specified learning modes.
PWM or Manchester encoding and selectable timing support compatible RF circuitry.
Queue counter, timer bits, programmable timeout, and tunable oscillator are documented by Microchip.
SN denotes an 8-lead plastic SOIC with a nominal 150 mil body. The site's catalog specifies 8-SOIC, 0.154-inch width, matching its existing normalized package entry. The T in HCS362T specifies tape-and-reel ordering, not a different pinout. Confirm mechanical dimensions and pin-1 orientation against DS40189E.

The registered package and local JPG were checked. This illustration is not a dimensional drawing.
Microchip DS40189E 8-lead SOIC top-view configuration:
Button input 0.
Button input 1.
Button input 2.
Button input 3 or RF-enable output.
Ground reference.
Encoder data and programming connection.
LED or shift-related function, according to configuration.
Positive supply.
Check multiplexed functions before finalizing the schematic.
| Manufacturer | Microchip Technology |
|---|---|
| Order code | HCS362T-I/SN |
| Function | KEELOQ code-hopping encoder |
| Ordering presentation | Tape and reel |
| Package | 8-lead plastic SOIC, 150 mil body |
| Temperature grade | Industrial, −40 to +85 °C |
| Operating supply | 2.0 to 6.3 V |
| Transmission stream | 69 bits |
| Encrypted hopping portion | 32 bits |
| Fixed portion | 37 bits |
| Encryption keys | Two programmable 64-bit keys |
| Seed | 60 bits |
| Button inputs | Four |
| Available functions | Up to 15 |
| Output modulation | PWM or Manchester |
Validate key learning, RF timing, and decoder compatibility as a system.
HCS362-I/SN is the separate non-T order form in the product database. Confirm packaging and assembly needs before selecting between order forms. Other HCS encoders are not automatically interchangeable; compare transmission format, pin functions, provisioning, synchronization, package, and temperature grade. No unverified internal alternative link is provided.
Microchip Technology publishes HCS362 datasheet DS40189E with the encoder architecture, electrical characteristics, pinout, package, and product identification system. Its ordering table defines HCS362T as tape and reel, I as −40 to +85 °C, and SN as the 8-lead plastic SOIC.
Encode button commands for a matching receiver.
Support multiple enrolled remote functions.
Transmit configured actions for a security receiver.
Use a programmed encoder identity in a unidirectional link.
Verify the complete HCS362T-I/SN order code, SOIC marking, reel labeling, and lot traceability. Confirm secure key, serial-number, seed, and configuration programming through an authorized process and test against the intended receiver.
It is the tape-and-reel ordering form of the HCS362 encoder.
I is the industrial −40 to +85 °C grade; SN is the 8-lead plastic SOIC.
No. A compatible receiver and external RF transmitter circuitry are needed.
Code hopping requires protected key provisioning and correct receiver synchronization. Verify the multiplexed RFEN and LED pins, modulation, oscillator calibration, timing, supply conditions, and complete RF link against DS40189E before release.
The following parts include "HCS362T-I/SN" in Silicon Labs HCS362T-I/SN.
The following parts are popular search parts in Test and Measurement.