Unit Price:$0
Ext Price:$0



Diodes Incorporated AP7361EA fixed-output regulator in SOT223.
AP7361EA-10E-13 is a fixed 1.0 V AP7361EA low-dropout linear regulator rated for up to 1 A. This E order code uses the SOT223 package with IN, GND and OUT signal pins and no enable pin. Account for input headroom and heat dissipation at the intended load.
No external output-setting divider.
Local supply for medium-current loads.
Recommended 2.2–6.0 V input.
Thermal area for PCB heat spreading.
LCDCHIP registers TO-261-4, TO-261AA. Diodes specifies AP7361EA-10E-13 as SOT223. The package JPG illustrates the body class; use the Diodes SOT223 outline, pin-1 orientation and tab drawing for the PCB footprint.

Input supply; bypass to ground with at least 1 µF ceramic close to the pin.
Ground reference; return the input and output capacitors here.
Fixed regulated output; bypass to ground with at least 2.2 µF ceramic.
Use the manufacturer SOT223 package drawing to confirm the tab connection and thermal land pattern; the JPG is illustrative.
The signal pin order follows the manufacturer SOT223 top-view table. The ER suffix denotes a different reverse pinout.
| Exact orderable | AP7361EA-10E-13 |
|---|---|
| Manufacturer | Diodes Incorporated |
| Function | Fixed 1.0 V, 1 A low-dropout linear regulator |
| Recommended input voltage | 2.2 V to 6.0 V; maintain output headroom |
| Output current | Up to 1 A, subject to thermal limits |
| Nominal output voltage | 1.0 V |
| Quiescent current | 68 µA typical under data-sheet conditions |
| Input capacitor | At least 1 µF ceramic at IN; 4.7 µF shown in application circuit |
| Output capacitor | At least 2.2 µF ceramic at OUT; 4.7 µF shown in application circuit |
| Enable | No enable pin on SOT223 fixed-output option |
| Package | SOT223, IN/GND/OUT signal pinout |
| Operating ambient temperature | −40 °C to +85 °C |
| Package identification code | 61EA-10 |
Verify dropout at the intended current, capacitor derating and thermal resistance in the Diodes electrical and package tables.
No internal alternative is linked because an exact LCDCHIP substitute was not confirmed through the product API. Match 1.0 V output, SOT223 IN/GND/OUT pinout, tab configuration, 1 A rating, capacitor requirements and thermal limits. SOT223R has a different signal pin order.
Diodes Incorporated AP7361EA data sheet DS42797 Rev. 3-2 lists exact orderable AP7361EA-10E-13 as fixed 1.0 V in SOT223, with package identification code 61EA-10. Consult manufacturer documentation for final design limits.
Local regulated supply.
Fixed voltage rail.
Point-of-load regulation.
Medium-current supply rail.
Check exact order code AP7361EA-10E-13, identification code 61EA-10, lot traceability, SOT223 body and pin-1 orientation against Diodes documentation. The package JPG is illustrative.
Yes. AP7361EA-10E-13 is the fixed 1.0 V SOT223 option.
No. This SOT223 order code uses IN, GND and OUT without an enable pin.
Yes. E is the SOT223 IN/GND/OUT variant; ER is the reverse-pinout SOT223R variant.
Use at least 2.2 µF ceramic at OUT, placed close to the regulator; check derating.
Place at least 1 µF ceramic at IN and at least 2.2 µF ceramic at OUT. The manufacturer application circuit illustrates 4.7 µF on each side. Check ceramic derating, dropout and junction temperature, and use the SOT223 tab drawing when designing the copper area.
The following parts include "AP7361EA-10E-13" in Silicon Labs AP7361EA-10E-13.
The following parts are popular search parts in Test and Measurement.