Unit Price:$0.73
Ext Price:$0.73



TPA8801B-TR from 3PEAK is a precision pA-to-nA current-input analog front end that converts very small sensor currents into a voltage output.
Specifications were checked against the manufacturer data sheet and current distributor listing.
TPA8801B combines a low-bias precision amplifier and configurable transimpedance network for dust sensors, photodiodes and other current-output sensors.
1 pA typical input bias supports measurement down to approximately 100 pA.
A single external gain resistor and AC-coupling network tailor sensitivity and remove DC offset.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
High-sensitivity current-to-voltage sensor interface
Analog current input and voltage output
2.1 V to 5.5 V; -40 C to +125 C
14-TSSOP (0.173", 4.40mm Width)
This ordering code uses the 14-TSSOP (0.173", 4.40mm Width) package.

Confirm exact numbering and the latest land pattern before PCB release.
| Input range | pA to nA sensor currents |
|---|---|
| Ideal DC gain | 4.56 Gohm with 20 kohm gain resistor |
| Input bias | 1 pA typical |
| Offset | 0.4 mV typical; +/-3 mV maximum |
| GBW | 1.3 MHz |
| Noise | 25 nV/root-Hz |
| Supply | 2.1 V to 5.5 V |
| Quiescent current | 700 uA maximum |
| Temperature | -40 C to +125 C |
| ESD | 8 kV HBM; 2 kV CDM |
| Package | 14-lead TSSOP |
| Packing | 3,000-piece tape and reel |
No database-listed substitute was linked without exact electrical, package and configuration compatibility.
3PEAK lists the exact production TSSOP-14 tape-and-reel order code.
Converts photodetector current for PM2.5 and PM10 signal processing.
Amplifies low-level detector current into a usable voltage.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
High-sensitivity current-to-voltage sensor interface
14-TSSOP (0.173", 4.40mm Width)
No exact internal replacement was verified. Review any candidate against the manufacturer documentation.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "TPA8801B-TR" in Silicon Labs TPA8801B-TR.
The following parts are popular search parts in Test and Measurement.