Unit Price:$8.71
Ext Price:$8.71



MAX6495ATT/V+ from Analog Devices Inc. / Maxim Integrated is an AEC-Q100 qualified 5.5 V to 72 V overvoltage switch and limiter controller for an external n-channel MOSFET.
Specifications were checked against the manufacturer data sheet and current distributor listing.
MAX6495 monitors a resistor-programmed overvoltage threshold and controls an external n-channel MOSFET. The circuit can disconnect a load during an overvoltage event or regulate the MOSFET in limiter mode while providing fast gate discharge and thermal protection.
A 5.5 V to 72 V input range, AEC-Q100 qualification and -40 C to +125 C operation suit automotive load-dump and industrial supply protection.
The internal charge pump enhances the external nMOSFET gate about 10 V above the monitored node, while a 100 mA pulldown provides rapid turn-off during faults or shutdown.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
Automotive high-voltage overvoltage switch and limiter controller
Analog OVSET divider, active-low shutdown, external nMOSFET GATE drive and OUTFB sensing
5.5 V to 72 V supply; adjustable overvoltage threshold; -40 C to +125 C
6-WDFN Exposed Pad
This ordering code uses the 6-WDFN Exposed Pad package.
Expected library path: /upload/package/6-WDFN-Exposed-Pad.jpg
Confirm exact numbering and the latest land pattern before PCB release.
| Controller type | External-nMOSFET overvoltage switch and limiter |
|---|---|
| Supply voltage | 5.5 V to 72 V |
| Input UVLO | 5 V typical |
| OVSET threshold | 1.24 V typical |
| OVSET hysteresis | 5 percent typical |
| Gate enhancement | About 10 V above IN or OUTFB under normal operation |
| Gate pullup current | 100 uA typical |
| Fast gate pulldown | 100 mA during shutdown or overvoltage |
| Overvoltage response | Gate clamp within approximately 0.5 us in switch mode |
| Protection | Thermal shutdown and controlled output-capacitor discharge |
| Qualification | AEC-Q100 automotive qualified |
| Operating temperature | -40 C to +125 C |
| Package | 6-pin TDFN, 3 mm x 3 mm, exposed pad |
MAX6495ATT/V+T is a related product in the library. Confirm electrical behavior, package, pinout, ordering media and configuration before substitution.
Similarity of family name or package does not establish drop-in compatibility.
Analog Devices' production product page and Rev. 18 data sheet were checked for the exact AEC-Q100 tube-packed order code.
Protects downstream ECUs and converters from high-voltage battery-line transients using an appropriately rated external MOSFET.
Implements an adjustable disconnect or voltage-limiting front end for wide-input power systems.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
Automotive high-voltage overvoltage switch and limiter controller
6-WDFN Exposed Pad
No. Validate all electrical, mechanical and configuration differences first.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "MAX6495ATT/V+" in Silicon Labs MAX6495ATT/V+.
The following parts are popular search parts in Test and Measurement.
| Qty. | Unit Price | Ext. Price |
| 1+ | $8.71 | $8.71 |
| 10+ | $8.19 | $81.90 |
| 100+ | $7.76 | $776.00 |
| 1000+ | $7.32 | $7320.00 |
| 10000+ | $6.88 | $68800.00 |