Unit Price:$5.56
Ext Price:$5.56



MAX4925ELT+T from Analog Devices Inc. / Maxim Integrated is a low-current overvoltage protection controller that drives an external p-channel MOSFET and withstands input faults up to 28 V.
Specifications were checked against the manufacturer data sheet and current distributor listing.
MAX4925 monitors the input supply and disconnects a protected load through an external p-channel MOSFET when an overvoltage condition exceeds its fixed threshold.
Protects low-voltage circuitry from input faults as high as 28 V using a properly rated external pFET.
Uses only 13 uA typical supply current and adds startup debounce plus a fault flag.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
External-pFET overvoltage protection controller
Analog input monitor, pFET gate-drive output and active fault flag
Up to 28 V fault input; 5.65 V typical OVLO; 2.44 V UVLO; -40 C to +85 C
6-WFDFN
This ordering code uses the 6-WFDFN package.

Confirm exact numbering and the latest land pattern before PCB release.
| Protection architecture | Controller for external p-channel MOSFET |
|---|---|
| Maximum fault input | 28 V |
| Overvoltage threshold | 5.65 V typical for MAX4925 |
| Undervoltage lockout | 2.44 V typical |
| Threshold accuracy | Plus or minus 2.5% |
| Supply current | 13 uA typical |
| Startup debounce | 20 ms typical |
| Status output | Fault flag |
| Operating temperature | -40 C to +85 C |
| Package | 6-pin uDFN, 1.5 mm x 1.0 mm |
No exact internal replacement was verified. Match OVLO threshold, pFET topology, pinout, fault timing and package.
Analog Devices product documentation was checked for the MAX4925 and the ELT+T order code.
Isolates a low-voltage rail when a charger or adapter applies excessive voltage.
Adds compact front-end protection before downstream power-management circuitry.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
External-pFET overvoltage protection controller
6-WFDFN
No exact internal replacement was verified. Review any candidate against the manufacturer documentation.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "MAX4925ELT+T" in Silicon Labs MAX4925ELT+T.
The following parts are popular search parts in Test and Measurement.
| Qty. | Unit Price | Ext. Price |
| 1+ | $5.56 | $5.56 |
| 10+ | $4.29 | $42.90 |
| 100+ | $3.63 | $363.00 |
| 1000+ | $3.52 | $3520.00 |