Unit Price:$5.53
Ext Price:$5.53



MAX14515AEWA+T from Analog Devices / Maxim Integrated is an I2C-controlled, single-channel high-voltage liquid-lens driver in an 8-bump 1 mm by 2 mm wafer-level package supplied on tape and reel.
Specifications were checked against the manufacturer data sheet and current distributor listing.
The MAX14515 uses a charge-pump boost stage and H-bridge to create a differential drive across a capacitive liquid lens. An 8-bit monotonic DAC sets the output amplitude over an I2C-compatible interface; the enable pin controls a low-current shutdown mode.
Integrates high-voltage generation and differential lens drive in one IC.
An 8-bit monotonic control word supports repeatable lens adjustment.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
High-voltage capacitive liquid-lens driver
I2C-compatible two-wire control and differential VA/VB output
2.7 V to 5.5 V supply; -40 C to +85 C operation
8-WFBGA
This ordering code uses the 8-WFBGA package.

Confirm exact numbering and the latest land pattern before PCB release.
| Function | Differential liquid-lens driver |
|---|---|
| Supply voltage | 2.7 V to 5.5 V |
| Specified temperature | -40 C to +85 C |
| Output load | 220 pF liquid lens in published output specification |
| Differential output RMS | 42 V minimum, 47 V typical at full code under data-sheet conditions |
| Output control | 8-bit monotonic DAC |
| Output switching | 1.1 kHz typical |
| I2C serial clock | 400 kHz maximum |
| Shutdown current | 500 nA maximum with EN at GND |
| Sleep current | 3 microamperes maximum under specified conditions |
| Output ESD | +/-15 kV human-body model |
| Package | 8-bump WLP, 1 mm by 2 mm |
| Ordering format | Tape and reel |
The MAX14515B is a related liquid-lens driver, but its control and electrical details need a full design review. No exact internal alternative has been verified for this ordering code; confirm lens load, I2C commands, shutdown behavior, pinout and assembly format before considering a change.
Analog Devices maintains the former Maxim Integrated MAX14515 series. The MAX14515B family is separately documented; compare registers and electrical limits before considering it in a redesign.
Controls a liquid lens in a space-constrained camera module.
Sets lens drive amplitude from a low-voltage host interface.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
High-voltage capacitive liquid-lens driver
8-WFBGA
No exact internal replacement was verified. Review any candidate against the manufacturer documentation.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "MAX14515AEWA+T" in Silicon Labs MAX14515AEWA+T.
The following parts are popular search parts in Test and Measurement.
| Qty. | Unit Price | Ext. Price |
| 1+ | $5.53 | $5.53 |
| 10+ | $4.27 | $42.70 |
| 25+ | $3.94 | $98.50 |
| 100+ | $3.60 | $360.00 |
| 250+ | $3.34 | $835.00 |
| 1000+ | $3.24 | $3240.00 |
| 2500+ | $3.08 | $7700.00 |