Unit Price:$28.28
Ext Price:$28.28



HDL6M06502B from ABLIC Inc. is a 16-channel high-voltage SPST analog switch with active ground clamp for ultrasound transmit and receive signal routing in a 52-pin QFN.
Specifications were checked against the manufacturer data sheet and current distributor listing.
HDL6M06502B organizes sixteen high-voltage SPST switches into four independently controlled banks. Active ground clamps protect low-voltage receive circuitry and suppress unwanted transients.
Routes bipolar ultrasound signals as high as +/-100 V across sixteen channels.
Integrated active clamps and low static power simplify compact multi-channel front ends.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
High-voltage ultrasound analog switch and ground clamp
Four-bank digital switch control with sixteen analog channels
+/-100 V signal range; 10 kHz to 20 MHz; 1.8 V to 5 V logic; 52-QFN, 8 mm x 8 mm
52-VFQFN Exposed Pad
This ordering code uses the 52-VFQFN Exposed Pad package.

Confirm exact numbering and the latest land pattern before PCB release.
| Channels | 16 in four banks |
|---|---|
| Signal voltage | +/-100 V |
| Signal bandwidth | 10 kHz to 20 MHz |
| Peak current | 2 A per channel |
| Main switch resistance | 8 ohm typical |
| Bleed resistance | 40 kohm typical |
| Off isolation | -52 dB at 5 MHz |
| Crosstalk | -60 dB at 5 MHz |
| Clamp resistance | 20 ohm typical |
| Logic supply | 1.8 V to 5 V |
| Analog supply | 5 V single supply |
| Static power | 1 mW typical |
| Package | 52-pin QFN, 8 mm x 8 mm |
Channel count, bank control and clamp behavior are application-specific; validate any substitute at circuit level.
Manufacturer documentation and lifecycle information were checked for the exact order code.
Switches high-voltage transmit pulses and sensitive echo signals across multi-channel probes.
Provides compact protected routing for piezoelectric transducer arrays.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
High-voltage ultrasound analog switch and ground clamp
52-VFQFN Exposed Pad
No exact internal replacement was verified. Review any candidate against the manufacturer documentation.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "HDL6M06502B" in Silicon Labs HDL6M06502B.
The following parts are popular search parts in Test and Measurement.
| Qty. | Unit Price | Ext. Price |
| 1+ | $28.28 | $28.28 |
| 10+ | $22.89 | $228.90 |
| 25+ | $21.55 | $538.75 |
| 100+ | $20.66 | $2066.00 |
| 260+ | $19.36 | $5033.60 |