Unit Price:$1.46
Ext Price:$1.46



CAP017DG-TL from Power Integrations is a 1000 V automatic X-capacitor discharge controller for AC-DC inputs, rated for X capacitors up to 2.5 uF, in tape-and-reel SOIC-8.
Specifications were checked against the manufacturer data sheet and current distributor listing.
CAPZero disconnects the safety discharge resistors while AC mains is present and reconnects them after line removal, reducing standby loss while preserving required X-capacitor discharge behavior.
Eliminates continuous resistor loss to support very low no-load input power.
Self-powered two-terminal operation simplifies placement before or after the input fuse.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
Zero-loss automatic X-capacitor discharge
Two-terminal mains-sensing connection in series with X-capacitor discharge resistors
1000 V internal MOSFETs; X capacitance up to 2.5 uF; -10 C to +105 C
8-SOIC (0.154", 3.90mm Width)
This ordering code uses the 8-SOIC (0.154", 3.90mm Width) package.

Confirm exact numbering and the latest land pattern before PCB release.
| Function | Automatic X-capacitor discharge |
|---|---|
| Maximum breakdown voltage | 1000 V |
| Maximum X capacitance | 2.5 uF |
| Standby consumption | Less than 5 mW at 230 VAC |
| Line frequency | 47 Hz to 63 Hz |
| Drain saturation current | 1.25 mA minimum |
| Operating temperature | -10 C to +105 C |
| Package | SOIC-8 |
| Packing | Tape and Reel |
CAP017DG is a related product in the library. Confirm electrical behavior, package, pinout, ordering media and configuration before substitution.
Similarity of family name or package does not establish drop-in compatibility.
Exact order code and manufacturer documentation were checked.
Discharges the differential-mode X capacitor after the mains input is removed.
Removes the continuous power penalty of conventional discharge resistors.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
Zero-loss automatic X-capacitor discharge
8-SOIC (0.154", 3.90mm Width)
No. Validate all electrical, mechanical and configuration differences first.
Yes. The registered package JPG is present locally.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "CAP017DG-TL" in Silicon Labs CAP017DG-TL.
The following parts are popular search parts in Test and Measurement.