Unit Price:$0.40
Ext Price:$0.40



CAP002DG-TL from Power Integrations is a two-terminal CAPZero device that disconnects safety discharge resistors while AC is present and reconnects them after line removal.
Specifications were checked against the manufacturer data sheet and current distributor listing.
CAP002DG reduces standby loss in AC input EMI filters by blocking discharge-resistor current during normal operation, then automatically providing the required discharge path when AC is removed.
Less than 5 mW consumption at 230 VAC avoids the continuous loss of conventional X-capacitor bleed resistors.
Two-terminal self-powered operation simplifies safety-compliant EMI filter designs.
Available in an established surface-mount or through-hole ordering format.
Electrical and environmental limits are defined by the official data sheet.
Automatic X-capacitor discharge controller
Two high-voltage terminals in series with external discharge resistors
825 V BVDSS; up to 500 nF total X capacitance; 1.5 Mohm total series resistance; -10 C to +105 C
8-SOIC (0.154", 3.90mm Width)
This ordering code uses the 8-SOIC (0.154", 3.90mm Width) package.

Confirm exact numbering and the latest land pattern before PCB release.
| Function | Automatic X-capacitor discharge |
|---|---|
| BVDSS | 825 V |
| Maximum X capacitance | 500 nF |
| Series resistance | 1.5 Mohm total |
| Standby consumption | Less than 5 mW at 230 VAC |
| Bias supply | Self supplied |
| Terminals used | 2 |
| Temperature | -10 C to +105 C |
| Package | 8-SOIC with safety creepage |
No database-listed substitute was linked without exact interface, configuration and provisioning compatibility.
The exact 825 V CAP002 tape-and-reel device and CAPZero safety application were checked.
Meets low no-load power targets while discharging EMI capacitors.
Allows larger X capacitors without continuous bleed loss.
Match the complete ordering code, package marking and reel or lot label to authorized-channel records. Inspect moisture handling and solderability requirements before assembly.
Automatic X-capacitor discharge controller
8-SOIC (0.154", 3.90mm Width)
No exact internal replacement was verified. Review any candidate against the manufacturer documentation.
No. The registered package JPG is currently missing.
Use the latest manufacturer documentation for schematic, PCB, thermal and production approval. Distributor attributes are useful for sourcing but do not replace the official data sheet.
The following parts include "CAP002DG-TL" in Silicon Labs CAP002DG-TL.
The following parts are popular search parts in Test and Measurement.