Unit Price:$0
Ext Price:$0



ATECC608C-TCSMS from Microchip Technology is the 8-lead SOIC TrustCUSTOM ordering option of the ATECC608C secure authentication IC. TrustCUSTOM is intended for customer-defined security configuration and provisioning, rather than the fixed Trust&GO identity flow.
Technical basis: Microchip ATECC608C Summary Data Sheet DS40002513 and its Trust Platform variant table. No current price or inventory claim is included.
The ATECC608C combines protected key storage and hardware cryptographic operations for embedded authentication. Microchip identifies ATECC608C-TCSMS as the TrustCUSTOM 8-SOIC option, equivalent in its standard blank form to an ATECC608C-SSHDA device. TrustCUSTOM supports a customer-specific configuration and secure provisioning workflow. Device behavior and credential contents depend on that approved configuration, so generic secure-element claims must not be mistaken for an already provisioned identity.
TrustCUSTOM permits application-specific configuration and credentials.
Cryptographic keys can be held in secure hardware rather than host memory.
Host and provisioning design can target the product's selected security use case.
The S suffix selects Microchip's narrow-body 8-lead SOIC option.
Hardware ECDSA and ECDH functions support authentication and key agreement.
SHA-256, HMAC and AES-128 functions support authenticated data workflows.
Keys, certificates and data may be stored under a customer-defined access policy.
Integrated hardware randomness supports key-generation use cases.
The registered package is 8-SOIC (0.154", 3.90mm Width). The local image is a generic SOIC illustration, not device-specific marking or a controlled land pattern. Use the current Microchip mechanical drawing for dimensions and orientation.

The ATECC608C 8-SOIC pin functions are NC on pins 1, 2, 3 and 7; GND on pin 4; SDA on pin 5; SCL on pin 6; and VCC on pin 8. SDA and SCL behavior depends on the selected I2C or single-wire configuration. Confirm the programmed interface before host wiring.
| Exact order code | ATECC608C-TCSMS |
|---|---|
| Manufacturer | Microchip Technology |
| Trust platform | TrustCUSTOM; customer-defined configuration and provisioning |
| Standard blank equivalent | ATECC608C-SSHDA according to Microchip variant table |
| Package | 8-lead SOIC; registered 8-SOIC (0.154", 3.90mm Width) |
| Host interface | I2C or single-wire as configured |
| Supply voltage | 2.0 V to 5.5 V per ATECC608C summary |
| I/O levels | 1.8 V to 5.5 V under specified conditions |
| Industrial temperature | -40°C to +85°C for Trust Platform SOIC option |
| Asymmetric engine | ECC P-256 ECDSA and ECDH |
| Additional cryptography | SHA-256, HMAC and AES-128 |
| Provisioned state | Must be established from the customer-specific manufacturing record |
Operational capabilities depend on configuration and locked slot permissions.
Do not treat a blank TrustCUSTOM device as a drop-in substitute for a pre-provisioned Trust&GO or TrustFLEX part. Check the customer configuration, keys, certificates, interface, package and lifecycle. No unverified internal alternative link is included.
Microchip's ATECC608C summary data sheet identifies ATECC608C-TCSMS as the TrustCUSTOM 8-pin SOIC ordering option and equates the standard blank form to ATECC608C-SSHDA. It describes TrustCUSTOM as a fully customizable configuration and customer-unique provisioning flow. Consult the complete manufacturer documentation and approved provisioning files for a particular deployment.
Provision customer-specific keys and certificates under an approved policy.
Design a signed-firmware workflow with appropriate host enforcement.
Configure protected challenge-response operations.
Integrate hardware ECDH into a complete secure protocol.
Verify the full -TCSMS code, marking, lot traceability and customer-specific configuration or provisioning record. The package image does not demonstrate identity or secure state. Test actual slot policy and cryptographic responses.
No such assumption is valid. TrustCUSTOM uses a customer-defined provisioning flow.
It identifies the 8-lead SOIC TrustCUSTOM option.
Check the selected configuration; the ATECC608C family supports I2C and single-wire modes.
No. Security policy, credentials and integration must be compared first.
Before release, review current Microchip documentation, electrical limits and errata. Validate approved configuration, secure provisioning, host software, certificate chain and threat model. A blank or misconfigured device cannot provide the intended authentication guarantee.
The following parts include "ATECC608C-TCSMS" in Silicon Labs ATECC608C-TCSMS.
The following parts are popular search parts in Test and Measurement.